Car OBD Scanner
Car models are now equipped with electronic control technologies that are more a than mechanically controlled cars. These datas are transferred to a computer system from a sensors. Sometime sensors tends to fail.
If you have trouble locating your car Malfunction Indicator Lights Or hesitant bringing your car in automotive centers due to high scanning cost. This is it! Don’t let your MIL or Malfunction Indicator Lights or Check Engine light on and disregard it for a long time. With OBD2, basic car troubles can be located instantly.
What is OBD2 Reader or scanner?
OBD2 Means On Board Diagnostic or Diagnostic Scanner / Reader. Through DLC or Data Link Connector, This tool helps scan your Engine ECU stored DTC’ and gives a driver or mechanic an instant analyzed troubleshoot theough this code and its meaning. DTC reader adapt OBD2 compliant vehicle mostly 1996 and above car models.
Where can you locate your OBD ports?
Most Cars OBD2 ports are located under the dashboard near the steering wheel on the driver side. Take a look at underneath your dash and there, You will find a unique connector which is also known as DLC. It has 16 pins OBD ports. All information from the ECU Engine Computer Unit can be read from there using the OBD2 or DTC reader. Make sure to verify it before buying from an auto shop or online.
Why do you need OBD2 Scanner?
Do you own more than one car? Is an automotive shop always around and open if there’s trouble in your car? Are you a DIY maintenance mechanic to your own car?
Many car owners avoid high diagnosis charges from an automotive repair shop. No! Car sometimes need diagnosis. Troubles in any car now is always an issue we expect even cars that are more than 3 years old.
With OBD2 scanner along, It will save you time.
How to use the OBD?
Its plug and play. Connect it to your OBD ports. Or follow the instruction manual provided along with the item. Remember the (KOEO) Key on Engine Off or (KOER) Key On Engine Running (Idle) rule of thumb.
Never run a car and monitor details on live data mode at the same time. This is a kind reminder for your own safety. If you need to monitor all the points for OBD monitoring data. Take along another driver and you monitor it alone.